In this application protocol, we describe the depletion of murine lineage cells from bone marrow samples, viral transduction of the remaining bone marrow cells, and their phenotypic analysis using flow cytometry.
Prepare a solution with phosphate buffered saline (PBS), pH 7.2, and 2 mM EDTA. Keep buffer cold (2–8 °C).
▲ Note: EDTA can be replaced by other supplements such as anticoagulant citrate dextrose formula-A (ACD-A) or citrate phosphate dextrose (CPD).
Prepare a solution containing phosphate-buffered saline (PBS), pH 7.2, 0.5 % bovine serum albumin (BSA), and 2 mM EDTA by diluting MACS® BSA Stock Solution 1:20 with autoMACS® Rinsing Solution. Keep buffer cold (2−8 °C) and degas before using.
▲ Note: EDTA can be replaced by other supplements such as anticoagulant citrate dextrose formula-A (ACD-A) or citrate phosphate dextrose (CPD). BSA can be replaced by other proteins such as respective serum albumin, respective serum, or fetal bovine serum (FBS). Buffers or media containing Ca2+ or Mg2+ are not recommended for use.
Isolate mononuclear cells by density gradient centrifugation using Ficoll-Paque™. Follow the Ficoll-Paque protocol from the data sheet below.
Download data sheet
Deplete cells expressing lineage markers from total bone marrow mononuclear cells using either the Direct Lineage Cell Depletion Kit, mouse or the Lineage Cell Depletion Kit, mouse. The first generates a high cell yield. The latter enables a more stringent depletion. Follow the protocol of the corresponding kit data sheet.
▲ Note: Lineage depleted cells can be further enriched, e.g., to obtain LSK cells, using fluorescence-activated cell sorting.
▲ Note: We recommend filtering the magnetically labeled cells before separation to guarantee a single-cell suspension either manually or via the automated protocol using the autoMACS® Pro Cell Separator.
Download kit data sheet
Isolation of untouched lineage-negative cells from a mouse bone marrow cell suspension. After isolation with the DIrect Lineage Cell Depletion Kit, mouse, lineage-negative cells were fluorescently stained with Lineage Cell Detection Cocktail-Biotin and Anti-Biotin-APC and analyzed by flow cytometry using the MACSQuant® Analyzer. To evaluate the LSK (Lin–Sca-1+c-kit+) fraction, cells were further stained with CD117-PE (c-kit) and Anti-Sca-1-FITC. Cell debris and dead cells were excluded from the analysis based on scatter signals and propidium iodide fluorescence.
Transduce the lineage marker-negative cells with a retroviral or lentiviral vector, either directly after MACS® enrichment or after pre-stimulation culture in appropriate cell culture medium supplemented with cytokines such as SCF, TPO, FLT-3L and IL-3 and IL-6.
Use Vectofusion-1®, a novel transduction enhancer, to boost transduction efficiency. Follow the protocol of the data sheet.
Download data sheet
Lineage marker-negative cells can be expanded in appropriate mouse HSC expansion media supplemented with cytokines such as SCF, TPO, FLT-3L and IL-3 and IL-6 according to standard cell culture protocols.
Lineage marker-negative cells can be further analyzed or sorted for HSC-specific surface markers by flow cytometry using MACS® Antibodies or recombinant engineered REAfinity™ antibodies.
Use the MACS Flow Cytometry – Multicolor Panel Builder to quickly assemble the antibodies for your analysis.
The following is a list of relevant resources that might be of interest:
Unless otherwise specifically indicated, Miltenyi Biotec products and services are for research use only and not for therapeutic or diagnostic use.
autoMACS, CliniMACS, the CliniMACS logo, CliniMACS Prodigy, CryoMACS, CytoMix, CytoStim, DendriMACS, ExiTron, ExpAct, FeraSpin, FeraTrack, GadoSpin, gentleMACS, LIFE 18, LIFE 21, MACS, the MACS logo, MACSductin, MACSelect, MACSfectin, MACSflex, MACSiBead, MACSiMAG, MACSmix, MACSprep, MACSQuant, MACSQuantify, MACSxpress, MidiMACS, MiniMACS, miRXplore, MultiMACS, NeuroBrew, NiraWave, OctoMACS, PepTivator, pMACS, PolySon, PrepProtect, QuadroMACS, REAfinity, REAlease, Rheo, StemMACS, StraightFrom, SuperAmp, SuperMACS, TexMACS, TheraSorb, thermoMACS, TransAct, Tyto, the Tyto logo, VarioMACS, Vio, Viobility, VioBlue, VioBright, VioGreen, Viscover, and µMACS are registered trademarks or trademarks of Miltenyi Biotec B.V. & Co. KG and/or its affiliates in various countries worldwide. Ficoll-Paque is a trademark of GE Healthcare companies. Vectofusin-1 is a registered trademark of Genethon. All other trademarks mentioned in this document are the property of their respective owners and are used for identification purposes only. Copyright © 2019 Miltenyi Biotec B.V. & Co. KG and/or its affiliates. All rights reserved.
Column | Max. number of labeled cells | Max. number of total cells | Separator |
---|---|---|---|
Positive or negative selection | |||
MS | 1×107 | 2×10⁸ | MiniMACS™, OctoMACS™, VarioMACS, SuperMACS II |
LS | 1×108 | 2×109 | MidiMACS™, QuadroMACS™, VarioMACS, SuperMACS II |
LS or Multi-24 Column Block (per column) | 1×108 | 1×109 | MultiMACS Cell24 Separator Plus |
XS | 1×109 | 2×1010 | SuperMACS II |
Positive or negative selection | |||
autoMACS | 2×108 | 4×109 | autoMACS Pro, autoMACS |
▲ Note: Column adapters are required to insert certain columns into the VarioMACS™ or SuperMACS™ II Separators. For details refer to the respective MACS Separator data sheet.
▲ Note: When using the Direct Lineage Cell Depletion Kit, the unwanted cell fraction is labeled and the target
cells remain unlabeled. Depending on the target cell frequency, the labeled fraction can represent the majority of the total cells. To avoid blocking of the column, do not exceed the maximum number of labeled cells per column. Estimate the number of labeled cells in the sample, split the sample if necessary and use the appropriate number of separation columns.
▲ Note: If separating with LS Columns and the MultiMACS Cell24 Separator Plus, use the Single-Column Adapter. Refer to the user manual for details.
Seems like you are coming from USA!
Do you want to visit our website in your country?