Products and Services - MACS Cell Separation - Automated cell separation - MultiMACS Cell24 Separator

MultiMACS™ Cell24 Separator Plus

  • Functional design for large sample or cell numbers 
  • Convenient and flexible handling with touchscreen interface 
  • Compatible with any starting material and cell separation strategy

The MultiMACS™ Cell24 Separator Plus was specifically developed for simultaneous multisample magnetic cell separations using MACS® MicroBead Technology. In combination with MACS MicroBeads and MACS Cell Isolation Kits, the MultiMACS Cell24 Separator can be used to isolate a wide variety of cell types or to deplete specific cells. It gives reliable and standardized results for semi-automated workflows.

MultiMACS Cell24 Separator Plus Flyer 

Explore the new features of the MultiMACS Cell24 Separator Plus by clicking on the orange buttons:

 

1. Flexible Cell Separation:
The Single Column Adapter enables use of up to 12 single columns. For more than 12 separations in one step the Multi-24 Column with the Deep Well Plates are the best choice.
2. Touchscreen:
Ease of use and easy to operate with touchscreen interface to guide you through the simple cell isolation protocol.
3. Elution Chamber with Lids:
Magnetically labeled cells can be collected in 24-well Deep Well Plates or 5 mL tubes.
If you elute into 24-well Deep Well Plate you will need to use the Lid I on the Elution Chamber.
If you elute into 5 mL tubes you will need to use the Lid II on the elution chamber and the 5mL Tube Rack.
4. MACS Elution Station and Elution Chamber:
If you want to do a positive selection, transfer the column block or the Single-Column Adapter to the Elution Chamber after you collect non-labeled cells, follow instructions on the touchscreen and elute your labeled cell fraction. It's that easy!
5. Single-Column Adapter
Single-Column Adapter for parallel isolation of up to 9 samples - if you don’t have a large number of samples, you can use up to 9 single columns to perform your cell separation. Compatible columns include LS, LD and Whole Blood Columns. For elution of the labeled cell fraction in the Elution Chamber all slots have to be filled to ensure a closed system.
6. MultiMACS 5 mL Tube Rack:
You have the flexibility to collect your cells into 24-well Deep Well Plate, or alternatively into 5mL tubes using the MultiMACS 5 mL Tube Rack. The printing on the rack shows you where to place tubes if using the Single-Column Adapter.
7. Multi-24 Column Block:
allows you to isolate up to 24 samples in parallel. At minimum you must use 12 columns and run the remaining block later.
Capacity:
  • 1 x 109 total cells per column
  • 1 x 108 labeled cells per column
8. Column Blanks:
When using the Single-Column Adapter and not all 12 column slots, use the column blanks in lieu of the columns to ensure a close system for eluting the labeled cell fraction.
 

Flexible Cell Separation:
The MultiMACS Cell24 Separator Plus is the new cell separation workhorse. Whether it’s high sample numbers, large sample volumes or individual samples every now and then, the convenient design of the MultiMACS Cell24 Separator Plus allows the flexibility to “grow” with your needs.

MACS Elution Station and Elution Chamber and Lids:

If you want to do a positive selection, transfer the column block or the Single-Column Adapter to the Elution Chamber after you collect non-labeled cells, follow instructions on the touchscreen and elute your labeled cell fraction. It's that easy!

Single-Column Adapter:
Single-Column Adapter for parallel isolation of up to 12 samples - if you don’t have a large number of samples, you can use up to 12 single columns to perform your cell separation. Compatible columns include LS, LD and Whole Blood Columns.

MultiMACS waste and elution plates
You can collect your cells into 24-well Deep Well Plates, Single-well Deep Well Plates or alternatively into 5 ml tubes.

Multi-24 Column Block

The Multi-24 Column Block enables high-throughput and high-volume applications by combining 24 columns in one. The Multi-24 Column Block saves time and makes handling of large sample numbers or volumes more convenient. read more

The single column adaptor helps to save column costs when you don’t have as many as 24 samples in every run. Designed for use with single MACS columns, you can insert 1 to 12 Whole Blood, LS or LD columns into the holder and fill the remaining slots with blank columns. This makes the MultiMACS Cell24 Separator an economic choice also for low sample numbers.

Use MACS® Whole Blood MicroBeads together with the MultiMACS Cell24 Separator Plus to achieve the fastest cell isolation from whole blood.

  • From whole blood to leukocyte subsets in one run
  • No density gradient centrifugation
  • Up to 10 mL of whole blood per sample

Demo / Quote request

Our worldwide sales and technical support teams are available to assist you with any questions you may have about cell separation and related instrumentation. To ask for more information, or request a demonstration, simply complete the online form.

Full automation

The MultiMACS Cell24 Separator Plus can be employed as a semi-automated benchtop instrument or integrated into fully automated liquid handling platforms. read more
View "10" | "50" | "100" products/page
Showing 1-3 of 3
Product Order no. Price

MultiMACS Cell24 Separator Plus

Components:
  • MultiMACS Cell24 Separator
  • MACS Elution Station
  • Elution Chamber Base
  • Elution Chamber Lid I
  • Elution Chamber Lid II
  • Multi-24 Column Block (130-095-692)
  • 2×24-well Deep Well Plate
  • Single-Column Adapter
  • MultiMACS 5 mL Tube Rack (130-095-331)
  • Column Blank Holder and 9 Column Blanks
  • Tubing
  • Power cord
  • Null modem cable
  • High power CAN cable
 
130-098-637 price on request here

Multi-24 Column Block

Components:
  • Multi-24 Column Block
  • 24-well Deep Well Plate
 
130-095-692 $270.00

Multi-24 Column Blocks

Components:
  • 8×Multi-24 Column Block
  • 8×24-well Deep Well Plate
 
130-095-691 $1,430.00
View "10" | "50" | "100" products/page
Showing 1-3 of 3

Customer login

Go

Forgot password?
Register for account

0 Shopping cart

Contact

Miltenyi Biotec Inc.
Phone: +1 800 FOR MACS
Fax:+1 877 591 1060
macs@miltenyibiotec.com
Contact overview

Product finder

Antibody panel builder

Toolbox

Loading...

Request a LIVE performance

Request a LIVE performance

Get rewarded for the reagents you love

Get rewarded for reagents

Change country

Please select your country to continue